DIY Guide: How to Save Money by Building a Dog House with a Shingled Roof and Siding for the Exterior.

Materials you'll need:

• 2x4s for framing

• Plywood for the walls and roof

• Shingles for the roof

• Siding for the exterior

• Nails or screws

• Hammer or drill

• Circular saw or hand saw

• Tape measure

• Pencil

• Paint or stain (optional)

• Insulation (optional)

Step 1: Plan the design Decide on the size and design of your dog house. Draw a sketch of the design and determine how much wood, plywood, shingles, and siding you'll need. Make sure the design is appropriate for the size of your dog.

Step 2: Cut the wood Using a circular saw or hand saw, cut the 2x4s to the appropriate lengths for the frame. Cut the plywood to size for the walls and roof.

Step 3: Assemble the frame Using nails or screws, assemble the frame of the dog house. Use a level to ensure that everything is straight and square.

Step 4: Add the walls and roof Attach the plywood to the frame to create the walls and roof. Use nails or screws to secure the plywood to the frame.

Step 5: Install the shingles Install the shingles on the roof of the dog house, starting at the bottom and working your way up. Use nails or roofing adhesive to secure the shingles in place.

Step 6: Install the siding Install the siding on the exterior of the dog house, starting at the bottom and working your way up. Use nails or screws to secure the siding in place.

Step 7: Finish the dog house If desired, paint or stain the dog house to match your home or landscaping. If you live in a colder climate, consider adding insulation to the walls and roof for added warmth.

Congratulations, you have successfully built a dog house with a shingled roof and siding for the exterior, and saved money in the process!