Window to Wall Cabinet: A Step-by-Step Guide to Upcycling an Old Window and Bookcase into a Beautiful Wall Cabinet

Materials you'll need:

• Old window

• Small bookcase

• Screws

• Drill

• Hinges

• Latch

• Knob or handle

• Paint or stain

• Paintbrush or roller

• Sandpaper

• Measuring tape

Step 1: Prepare the bookcase Remove any shelves or dividers from the bookcase. If desired, sand and paint or stain the bookcase to match your décor.

Step 2: Prepare the window Clean the window and remove any old hardware. Measure the size of the window opening and the bookcase to make sure they match up.

Step 3: Attach the hinges Attach the hinges to the bookcase and the window using screws and a drill. Make sure they are securely attached and aligned.

Step 4: Attach the latch Attach the latch to the inside of the bookcase and the window using screws and a drill. This will keep the cabinet closed when not in use.

Step 5: Attach the knob or handle Attach a knob or handle to the window to make it easier to open and close. This can be found at most hardware stores and can be attached using screws and a drill.

Step 6: Mount the cabinet Mount the cabinet on the wall using screws and a drill. Make sure it is level and securely attached.

Step 7: Add decorative touches Add decorative touches to the cabinet, such as a painted or stained finish, or decorative trim.